Pure brilliant white exterior gloss for wood & metal, Mould resistant paint film, Longer lasting, resists cracking, Weatherproof, Total protection guaranteed 6 years.
Store paint in dry conditions and protect from extreme temperatures.
Health, Safety and Environmental Information
This product is for exterior use only.
Solvent-based paint. Flammable. Repeated exposure may cause skin dryness or cracking.
Vapours may cause drowsiness and dizziness.
Contains ethyl methyl ketoxime, 3-iodo-2-propynyl butylcarbamate. May produce an allergic reaction. Keep away from sources of ignition - no smoking. Use only in well ventilated areas. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvent, thinners or white spirit. Keep out of the reach of children. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste paint. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
High VOC Content 25% to 50%
VOCs. (Volatile Organic Compounds) contribute to atmospheric pollution.
VOC symbol protected, used under licence.
EU limit value for this product (cat A/d): 300g/l (2010). This product contains max. 300g/l VOC.
Keep product sealed to ensure longevity.
Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry
Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Weathershield Exterior Undercoat to primed surfaces. Finish with 1 or 2 coats of Weathershield Quick Dry Exterior Gloss.
Before Painting: ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP)ƚ, wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
Weathershield Exterior Preservative Primer+ (BP) contains propiconazole, 3-iodo-2-propynyl-N-butyl carbamate. Use biocides safely.
Always read the label and product information before use.
Stir: stir thoroughly before use to ensure the paint is completely mixed.
Apply: apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 or 2 coats of Weathershield Exterior Gloss. Some dark colours may need a further coat.
Tip: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Dry: leave 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
Clean: for best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
Tip: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to store.